Kenz EKG Cable for Schiller Medical Systems

Model Number: LL-EKG-12 Brand Name: Lodalink Key Specifications/Special Features: Kenz EKG cable for Schiller medical systemsIntended useAnylink cable/lead-wire is intended to be used with ECG and EKG monitoring devices cable/lead-wire is used to connect electrodes, catheters and/or sensors placed at appropriate sites on the patient to a monitoring device for general monitoring and/or diagnostic evaluation by heath care professionalThis cable or lead-wire set meets the requirements of the standard ANSI/AAMI EC53, ECG cables and lead-wiresThis cable or lead-wire set is reusableInstructions for use:1. Connect the cable/lead-wire to OEM monitor

2. Connect the lead-wire set to the trunk cable

3. Prepare the skin by cleansing and drying the areas where the electrodes will be attached, typically 70% alcohol is used for this purpose, be sure to dry the skin

4. Attach the electrodes to the correct positions, see the monitor user documentation for instructions on positioning the electrodes

5. Connect the lead-wire set to the electrodes, refer to the monitor user documentation for detailed information

Maintenance
Before use, check that the product is intact and clean
Note: do not treat the cables with oils (household or lubricating) or aggressive fluids or solvents (acetone)

Cleaning

1) Disconnect the Anylink cable/lead-wire from the monitoring device, warning when disconnecting pull on the plug itself not on the cable

2) Dampen a clean cloth or gauze pad with an appropriate cleaning solution and wipe all exposed surfaces

3) Dampen a clean cloth or gauze pad with sterile or distilled water and again wipe all exposed surfaces

4) Dry all exposed surfaces with a clean, dry cloth or gauze pad

Warning: never immerse Anylink cable/lead-wire in any liquid

Caution: do not sterilize Anylink cable/lead-wire by autoclave, radiation or steam

Note: Anylink cable/lead-wire device is not made with natural rubber latex

Note: federal (US) law restricts this device to sale by or on the order of a physician

Disinfection

Disinfect with a chemical disinfectant, such as ethanol, propanol, phenolic disinfectant

Note: do not immerse the products in liquids, protect from strong UV radiation

Warnings

1) Anylink can’t be held liable for any trouble resulting from failure to observe the installation and operating rules stated in these directions for use

2) As with all medical equipment, carefully route cables to reduce the possibility of patient entanglement or strangulation

3) Do not use the cable