Lab Stainless Steel Bioreactor

Model Number: SDT 10T-#9173 Brand Name: Sidolim Key Specifications/Special Features: SpecificationsThe Sidolim in situ sterilizable fermentor (SDT 300L-1000L) system is a polite scale fermentor and designed for ease of use.Fermentor SDT 300L-1000LThe Fermentor SDT (300L-1000L) is a large size pilot scale fermentation systems and the top driving mechanism is applied. The head plate lifting system by air cylinder and linear motion guide is adapted in standard specification.The system can be used for microbial, insect and mammalian cell culturing procedures. The stainless steel (SUS 316L) vessel and the whole attachments can be sterilized automatically or manually in this pilot scale fermentation system and the whole fermentation procedures can be also performed automatically. The measured values of the procedures and monitored data are graphically displayed in the 8.5" color LCD screen and all the control parameters can be adjusted in the graphic mode. Agitation Drive DC motor, AC Gear motor Top drive motor (mechanical drive) Range 50~550 rpm 1 rpm Sensor Magnetic Hall sensor Impellers Turbine impeller (SUS 316L)
Foam breaker (SUS 316L) Control Microprocessor based PID Temperature Range( ) From 3 above the cooling water temperature to 80 (accuracy 0.1 ) Control The temperature is automatically controlled by the external heat exchanger system. Sensor RTD(Pt-100) Aeration Sparger Ring sparger (SUS 316L) Inlet filter The cartridge type sterilizable pleated type 0.2μm absolute filter is applied. Outer filter The same as inlet filter specification.(optional item) Control range Different vessel size and/or ordered specifications. Materials & Finish Vessel Using 316L stainless steel it is polished mechanically and/or electrically. Piping 316L stainless steel prevents contamination and is polished by electrically. O-rings/gaskets Viton or silicone material is used for the O-ring and the EPDM is used for the gasket. Control Unit Panel 8.5" Graphic Color LCD, membrane keypad Communications Memory stick, printer, computer with the RS-232C communication protocol Controller board Microprocessor based integrated controller board is adopted to measure, control and display the fermentation system Pressure control The pressure is controlled manually and/or automatically Power supply 220V 50/60Hz single phase, 380V 50/60Hz three phase